Nut

[samngcheesan]

As per subject

This nut is loose now and I unable to tighten the screw

The thread of the nut still ok

How ah?

 

[samngcheesan]

This is the nut

 

[lsm1991]

re-thread, if kenot, just use a longer bolt + additional nut

**if u just mean that the bolt's thread is screwed, then easylah cari new screw

 

[samngcheesan]

The thread not loose and no need to re-thread

Where ever I screw the screw, the nut will spin

 

[lsm1991]

OHHHHH finally i get it..... basically the 'nut' on the plate is loose and can spin freely?

if you use glue/nail polish takut takut when wana take out, shit happens and it gets stuck
why not try soldering it in place?

 

[samngcheesan]

yeah......

 

[vr2turbo]

Cannot hold nut with pliers?

 

[kayour]

if its important..very2 important...just bring it to the welding shop which has an ac/dc tig welding machine, since it is aluminium rite?

 

[samngcheesan]

unable to hold it as is inside the air filter box

---------- Post added at 08:45 AM ---------- 6 hour anti-bump limit - Previous post was at 08:44 AM ----------

OHHHHH finally i get it..... basically the 'nut' on the plate is loose and can spin freely?

if you use glue/nail polish takut takut when wana take out, shit happens and it gets stuck
why not try soldering it in place?

if its important..very2 important...just bring it to the welding shop which has an ac/dc tig welding machine, since it is aluminium rite?

unable to weld also because the nut is steel and the plate are aluminium

 

[^pomen_GTR^]

clamp the nut more into the plate...

 

[vr2turbo]

If all fails, use 2 ton epoxy.....

 

[kayour]

different material...then brazing it

 

[ken yeang]

supah glue....

 

[vr2turbo]

supah glue....

When need to tighten supah glue won't hold......