Vsixers : Perdana V6 Club Malaysia.

[kurt_629]

Sure, Huat Hup.

Go to mudah, enter perdana under car accessories, you will find it.
It's located in muar, johor but does postage.
One of the cheapest that I found in whole Malaysia.

But seller alittle attitude problem, Haha

 

[Lean]

Sure, Huat Hup.

Go to mudah, enter perdana under car accessories, you will find it.
It's located in muar, johor but does postage.
One of the cheapest that I found in whole Malaysia.

But seller alittle attitude problem, Haha

Oh.. Okok. Will take note on this. lolz

 

[kurt_629]

Oh.. Okok. Will take note on this. lolz

On my rear trip, I saw a perdana with the other version of rear light, led type but I don't like it nice.. something like BMW. I still prefer the traditional round type.

I'm looking for VRG front strut bar, found one in johor but was immediately sold.. damn hot item..

 

[Lean]

On my rear trip, I saw a perdana with the other version of rear light, led type but I don't like it nice.. something like BMW. I still prefer the traditional round type.

I'm looking for VRG front strut bar, found one in johor but was immediately sold.. damn hot item..

haha, no worries bro. U will sure find one soon. =)

 

[kurt_629]

haha, no worries bro. U will sure find one soon. =)

Hopefully lah..

Ultra racing also Same price as VRG, since Bro danz say VRG is good. I trust him:proud:

 

[NeuroOne]

i install the LED bar type of brakelights. bosan with the roundish design. me likey. hehe..
and yes, get the VRG strutbar. OEM quality, good stiffness and easy to remove.

 

[Lean]

i install the LED bar type of brakelights. bosan with the roundish design. me likey. hehe..
and yes, get the VRG strutbar. OEM quality, good stiffness and easy to remove.

Wow, very nice indeed bro neuro

 

[kurt_629]

i install the LED bar type of brakelights. bosan with the roundish design. me likey. hehe..
and yes, get the VRG strutbar. OEM quality, good stiffness and easy to remove.

if i recall correctly, i saw one in ipoh, is it you?
white perdana but don't have rear bottom light


this is my car

https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-ash4/q79/s720x720/1383076_10151761123313019_1620113174_n.jpg

https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-ash4/q77/s720x720/1379422_10151761123268019_1223620906_n.jpg

 

[nameejokerx]

here's mine. same as neuro except for the 'ampaian baju':rolleyes:.
his car is smoked one while mine is red.
@kurt_629 you are finding the SB and ARB right. i think i saw u in lowyat.
why take the 2 point SB and 16mm ARB?
why not take the 3 point and 19mm?

 

[kurt_629]

here's mine. same as neuro except for the 'ampaian baju':rolleyes:.
his car is smoked one while mine is red.
@kurt_629 you are finding the SB and ARB right. i think i saw u in lowyat.
why take the 2 point SB and 16mm ARB?
why not take the 3 point and 19mm?

yes, that's me, abang.

because of the engine bay in perdana, if i were to take 3 point, my mechanic told me that i have to remove a black box as it's in the way..

19mm, i can't even find..
i can only find 16mm in the market and it already cost RM350..
tried to get second hand but sold out

I'm thinking of going APM performax absorber to replace the original.
hopefully, its better than stock.

---------- Post added at 04:07 PM ---------- 6 hour anti-bump limit - Previous post was at 04:07 PM ----------

fierce ride you got there, twin exhaust with GT wing.. :wavey:

 

[nameejokerx]

yes, that's me, abang.

because of the engine bay in perdana, if i were to take 3 point, my mechanic told me that i have to remove a black box as it's in the way..

19mm, i can't even find..
i can only find 16mm in the market and it already cost RM350..
tried to get second hand but sold out

I'm thinking of going APM performax absorber to replace the original.
hopefully, its better than stock.

---------- Post added at 04:07 PM ---------- 6 hour anti-bump limit - Previous post was at 04:07 PM ----------

fierce ride you got there, twin exhaust with GT wing.. :wavey:

Haha.. me only go for aesthetic n daily driving only. performance zero.
For 19mm arb normally you need to order at accessory shop. My place here is 420 without installation. The most expensive compare to other bar.
I also try to find good suspension without sacrificing comfort.
My option is use standard suspension n modified bodykit to make look lowered with comfort.

Sent from my GT-N7105 using Tapatalk 4

 

[kurt_629]

Haha.. me only go for aesthetic n daily driving only. performance zero.
For 19mm arb normally you need to order at accessory shop. My place here is 420 without installation. The most expensive compare to other bar.
I also try to find good suspension without sacrificing comfort.
My option is use standard suspension n modified bodykit to make look lowered with comfort.

Sent from my GT-N7105 using Tapatalk 4

yeah, ARB very expensive..

I saw someone selling c tech front strut bar, 2 point, postage to johor at RM120.
then 19mm, ultra racing, ARB, cheapest is naga motorsport at RM400 with postage to johor.

as for suspension, my mechanic recommend me APM performax, below RM500 for all 4.

I'm on sport spring, may consider in trying it out..

i also more to comfort, everything stock.. V6 already very powerful.. no regret in buying this car..:proud:

 

[NeuroOne]

if i recall correctly, i saw one in ipoh, is it you?
white perdana but don't have rear bottom light

my car is black color bro..
haven't been in ipoh for awhile but plying the northbound NSE hiway about once every two months..

this saturday nite i will be going to JB for Vsixers Southern Official Gathering.
then on monday-tuesday going to Pengerang for work..

 

[hamtaro00]

rear bottom light? means those f1 blinking light? if saw a white perdana at ipoh big muffler and rim but driving like apek that will be me. hahahah

 

[kurt_629]

rear bottom light? means those f1 blinking light? if saw a white perdana at ipoh big muffler and rim but driving like apek that will be me. hahahah

Then I guess I saw you.. I also the Same, ah pek

 

[l2s_turbo]

my car is black color bro..
haven't been in ipoh for awhile but plying the northbound NSE hiway about once every two months..

this saturday nite i will be going to JB for Vsixers Southern Official Gathering.
then on monday-tuesday going to Pengerang for work..

You coming tomorrow? wat time? Wanna meet up? :wavey:

 

[DanzEterna]

yes, that's me, abang.

because of the engine bay in perdana, if i were to take 3 point, my mechanic told me that i have to remove a black box as it's in the way..

19mm, i can't even find..
i can only find 16mm in the market and it already cost RM350..
tried to get second hand but sold out

I'm thinking of going APM performax absorber to replace the original.
hopefully, its better than stock.

---------- Post added at 04:07 PM ---------- 6 hour anti-bump limit - Previous post was at 04:07 PM ----------

fierce ride you got there, twin exhaust with GT wing.. :wavey:

try to avoid apm performax, its a shitty sport spring & absorber, just save up your money & invest for a adjustable absorber.

 

[NeuroOne]

You coming tomorrow? wat time? Wanna meet up? :wavey:

sure boleh.
nanti i check where and when..

try to avoid apm performax, its a shitty sport spring & absorber, just save up your money & invest for a adjustable absorber.

yep. i had used APM performax purple color sportsprings before.
the performance is ok but the ride height is about the same as stock springs only, not lowered..
better save up and buy branded local adjustable suspension like HWL, Hotbits, HIT, GAB, etc..

 

[Lean]

Central TT seems slowing down. Seldom see v-sixers @ TTDI mosin lately.

 

[NeuroOne]

Central TT seems slowing down. Seldom see v-sixers @ TTDI mosin lately.

actually not. we still have TT there every friday nite.
i'm always there with 20 or so members every week.
maybe coz u cant see the cars park at the side of the road coz now other cars also park there, so the members have to park here and there. hehe..
u should drop by. but dont go too early, usually by 10.30pm above.