Crower Stroker Kit

[lydia_kl_6996]

Is it safe to use stroker kit from crower for B18C? there's an option to upgrade up to 2.26L 2260cc with this kit. how much is the price roughly?

 

[Danny101]

bro,
the kit alone is approx 9k plus if u send to usa ie benson machinery for a bore up job it would cost u maybe another 5 to 7k plus all freight and tax charges, final cost could be around 16k. here's one suggestion from me why dun u use a b20b block instead and put in the crower stroker of 85mm x 95mm so u dun have to put in sleeves and bore out the block to 6mm like u do on the b18c block ( 87mm x 95mm to get 2.26cc ) and its an instant drop in installation just need to bore 1mm ( can do it locally and save tons ) and u get yourself a 2.156 vtec with a lot of torque..................cheers.

 

[xerofighter]

bro,
the kit alone is approx 9k plus if u send to usa ie benson machinery for a bore up job it would cost u maybe another 5 to 7k plus all freight and tax charges, final cost could be around 16k. here's one suggestion from me why dun u use a b20b block instead and put in the crower stroker of 85mm x 95mm so u dun have to put in sleeves and bore out the block to 6mm like u do on the b18c block ( 87mm x 95mm to get 2.26cc ) and its an instant drop in installation just need to bore 1mm ( can do it locally and save tons ) and u get yourself a 2.156 vtec with a lot of torque..................cheers.

genius alert. had to read it a couple of times to get what you mean. rezpekt

 

[Danny101]

xerofighter,
Hey thanks, got some few years of experience with vtec myself...................before i sold my ek, now with toyota hope u dun mind i post suggestion here.......cheers.

 

[399]

don't be so humble la... everyone knew that u were a vtec king & still is!

 

[lydia_kl_6996]

Cost?

So with your suggestion on B20B how much the price roughly? Around how much HP and Torque i gain with this setup? Reliability?

My mech did say about B20B before, but he did on B16A+B20B. Since I'm quite new with this "mixing" thing so i need a real advice from you guys.

What other factor/accessories need to be modified with this hybrid thing? ECU still can use stock ar?

 

[399]

hp=200 on wheel, reliability=0.

 

[HanafyEG]

depends on the driver..b20b with 200hp whp can be reliable..if u dont whack it every day..i dont recommend it for a heavy footed, hehe..b16a is for them..hehe

 

[ace79]

HanafyEG : bro, B16A + B20B is a no - no for a heavy footer? Aiyoo..baru plan to save up money to do a B20B bottom end conversion.. What kind of heavy - footed driver do you mean? Example :

Drive to work : 7 kms so - so, sometimes ( most of the times, if the traffic is clear ) I hit 8500rpm and go up to 140kph..
Drive from work to home : about 7 kms oso lah, if I go home after 12pm ( traffic is damn clear ) I hantam up to 9000rpm and go up to 170kph sometimes..
Fuel consumption : for about a full tank ( around RM50++, about 30++ litres ) I can only manage up to 240 - 260 kms..

This kind of driving is not suitable for a B16A + B20B conversion? What if I fit a block guard, dun rev up to 8000rpm everyday ( mebbe on weekends of Sepang / Bkt Tinggi / Hulu Langat or night street driving, hint hint! )and Mobil 1 every 5000 kms? ( now my car is on Esso Ultron )

Anyway, at the moment, since I do not have a working sound system, maybe that's why I'm driving like this. If got my sound system, maybe I drive slower to let other ppl listen to my beats in my ride ( eheh, ah beng alert... ;) ) Opinions?

 

[basahboy]

depends on the driver..b20b with 200hp whp can be reliable..if u dont whack it every day..i dont recommend it for a heavy footed, hehe..b16a is for them..hehe

AGREED....have used a B20B for a year....i dun floor it too much but once a while layan jugak....one day lepas main for less than 1km, the crank bearing broke and my crank was scrapping it...also, my B20B more than 7 years which makes it more unrealiable....whp= 'melayang', reliability= habrak....haha...